Service Companion Private Limited

How the Saudization Percentage Is Calculated (Nitaqat 2026)

7 min readLast updated

The Nitaqat formula step by step: who counts and at what weight, the 26-week average, the Qiwa contract rule, and how your required percentage is set.

Your Nitaqat band comes from two numbers: the Saudization percentage your entity has, and the minimum MHRSD sets for your activity and size. Both are calculated by published rules.

In short: the Saudization percentage is the sum of Saudi employee averages across your entity's establishments, divided by the sum of Saudi plus expatriate averages, times 100. Saudis are weighted by registered salary: SAR 4,000 or more counts as one, SAR 3,000–3,999 as half, below SAR 3,000 as zero. Since 15 April 2026 only contracts authenticated on Qiwa count. The rate is normally a 26-week average. The required minimum for each band is set by a formula on your entity's total workforce, with constants published per activity.

What each band allows is in our Nitaqat categories guide; the wider obligations are in Saudization requirements 2026. This page is the arithmetic, not legal advice.


Step 1: The Saudization percentage formula

MHRSD's procedural guide for the developed Nitaqat programme defines the rate this way:

Saudization rate = sum of Saudi employee averages in the entity's establishments ÷ (sum of Saudi employee averages + sum of expatriate employee averages) × 100

Three definitions in the guide decide what goes into it:

  • Entity (الكيان) is the unit the Ministry uses for Saudization, recruitment and transfers. It covers all branches with the same economic activity owned by one establishment. Your rate is calculated across the entity, not branch by branch.
  • Expatriate labour means workers who are not citizens of a GCC state. GCC nationals are not in the expatriate sum.
  • Economic activity classifies the entity by the business it carries on. It decides which constants apply in Step 5.

Step 2: Who counts, and at what weight

A Saudi employee is not always one unit. Qiwa weights Saudis by the registered monthly salary:

Registered monthly salary Counts as
SAR 4,000 and above 1
SAR 3,000–3,999 0.5
Below SAR 3,000 0

A Saudi registered in more than one establishment counts only in the oldest one.

Qiwa's special cases:

Category Weight on Qiwa Conditions Qiwa states
Saudi with special needs 4 Under 50 employees: directly. 50 or more: only with a valid Muawama certificate, otherwise 1. Minimum salary SAR 4,000. Cap: 20% of Saudis under 50 employees, 10% at 50 or more
Saudi with previous convictions or released prisoner 2 Cap: 10% of Saudis
Saudi student 0.5 Minimum salary SAR 2,000. Cap: 10% of Saudis (40% in retail and wholesale, activity 460)
Saudi part-time employee 0.5 —
Saudi remote employee 1 SAR 4,000+; 0.5 at SAR 3,000–3,999
GCC citizen; son or daughter of a Saudi woman; mother or widow of a Saudi; displaced tribes 1 each Cap: 10% of Saudis per category
Saudi outsourcing (leased Saudi) 1 Counted at the hiring establishment; cap 10%. Leasing company must be a recruitment company (category A), an employment company or a Saudi secondment provider
Owner (Saudi or non-Saudi) 1 Main branch only, oldest establishment, one owner
Flexible work 1 per 160 hours —

Qiwa also lists social investment workers (1.25), Ajeer security guards and strategic partnership trainees, each with its own conditions. Two combined caps apply: special needs, released prisoners and students together at most 15% of Saudi employees (40% in retail and wholesale), and GCC citizens, children of Saudi women, mothers or widows of Saudis, displaced tribes and Saudi outsourcing together at most 15%.

The expatriate side has weights too: Palestinians holding an Egyptian passport and Baluchi workers count as 0.25 (up to 50% of employees), and workers from Myanmar count as zero outside Makkah and Madinah.

Step 3: Only authenticated contracts count

From 15 April 2026, Qiwa calculates Nationalization rates on employment contracts authenticated on the platform. A Saudi on your payroll without an authenticated contract adds nothing to the numerator. Our guide to Qiwa employment contracts covers how to authenticate one.

Step 4: The averaging period

Qiwa uses two methods:

  • Traditional: the average Nationalization rate over 26 weeks. Qiwa says its purpose is to reduce the risk of dropping a band when Saudi employees leave.
  • Immediate: the rate of a single week. It applies when the entity has stayed at Low Green or above for 13 consecutive weeks, or is newly established (its oldest establishment registered no more than 13 weeks ago). Small entities of five employees or fewer (category A) are always on the immediate method.

An entity that stays in Red for 8 consecutive weeks, or enters Red for 12 non-consecutive weeks, goes back to the traditional method automatically. The MHRSD guide lists immediate calculation among the services for Low Green, Mid Green, High Green and Platinum, and not for Red.

Step 5: How the required percentage is set

The 2026 guide sets the minimum rate for each band (Low Green, Mid Green, High Green, Platinum) with one formula:

Y = m × ln(x) + c

  • Y is the minimum rate for the band.
  • m is a curve constant for each band and activity.
  • c is a Saudization constant for each band, activity and year, published for 2026, 2027 and 2028.
  • x is the entity's total workforce, and ln is the natural logarithm.

Both constants are in Annex 1 of the guide. Your rate is placed against the four minimums: below Low Green's is Red; at or above it but below Mid Green's is Low Green; and so on up to Platinum.

Two things follow. Where m is above zero, the required rate rises slowly as the entity grows. Where c is higher in 2027 and 2028, the requirement rises each year with no change in your workforce. Entities of five employees or fewer are handled separately on Qiwa. Its page says they have two levels, Green and Red, and in the next line that at least one Saudi is needed to enter and stay in Low Green. The page does not reconcile the two.

A worked example (our arithmetic)

The figures below are our own illustration, not an MHRSD or Qiwa calculation. The constants are the 2026 operation and maintenance (التشغيل والصيانة) row of Annex 1. Three assumptions are our reading, not the guide's: x is plain headcount (the guide does not say whether x is weighted); weighted Saudis go in both the numerator and the denominator; and the 26-week average is a simple mean of weekly rates.

An operation and maintenance entity has 100 employees: 85 expatriates and 15 Saudis, all on authenticated contracts. Eleven Saudis are registered at SAR 4,000 or more, four at SAR 3,000–3,999.

Its rate. Weighted Saudis = 11 + (4 × 0.5) = 13. Rate = 13 ÷ (13 + 85) × 100 = 13.27%.

Its minimums. ln(100) = 4.605. Annex 1 gives Low Green m = 0.14 and c (2026) = 17.12, so Y = 0.14 × 4.605 + 17.12 = 17.76%. The same steps give Mid Green 21.76%, High Green 27.17% and Platinum 32.59%.

Result: 13.27% is below 17.76%, so the entity is Red.

What would move it. If the four SAR 3,000–3,999 salaries were registered at SAR 4,000 or more, the rate would be 15 ÷ 100 = 15.00%, still Red. With that change and four more Saudis at SAR 4,000 or more, the entity has 104 employees. The Low Green minimum becomes 17.77%, and the rate is 19 ÷ 104 = 18.27%. With three new hires instead of four it would be 18 ÷ 103 = 17.48%, still short.

How long it would take. On the 26-week average, if nothing else changed, the average reaches 17.77% only after 24 of the 26 weeks are at the new rate. That is about six months of a stable workforce. The Nitaqat calculator runs the same comparison on your numbers.

Where companies' own numbers go wrong

  • Payroll is not what Qiwa reads. The weight follows the registered monthly salary.
  • Branches. The rate is for the entity, so one branch's staff move every branch's band.
  • Caps. The higher weights apply only up to Qiwa's caps.

How SCPL helps

  • Rate and gap assessment. We work out your percentage from your Qiwa records, apply the Annex 1 constants for your activity and size, and give the gap in employees. Saudization and Nitaqat services.
  • Qiwa contracts. Authenticating and correcting contracts so that every Saudi you employ is counted. Qiwa services.
  • Registered salaries. Keeping GOSI wages, WPS and Mudad consistent so the weight matches what you pay. GOSI, WPS and Mudad compliance.
  • Saudi hiring. Sourcing Saudi candidates through our MHRSD-licensed recruitment partners; you employ the people hired directly. Recruitment services.

FAQ

How do I calculate my Saudization percentage?

Add the weighted Saudi employees across all establishments in your entity, divide by weighted Saudis plus expatriates, and multiply by 100. Saudis at SAR 4,000 or more registered salary count as one, SAR 3,000–3,999 as half, below SAR 3,000 as zero. Only Saudis with Qiwa-authenticated contracts count.

Is the Saudization percentage weekly or a 26-week average?

The default is a 26-week average. A single week's rate is used after 13 consecutive weeks at Low Green or above, for newly established entities, and always for entities of five employees or fewer.

What percentage do I need for Low Green?

It depends on your activity and total workforce. MHRSD's 2026 guide computes it as m × ln(total workforce) + c, using the constants for your activity in Annex 1. There is no single national percentage.

Will my required percentage change in 2027?

For many activities, yes. Annex 1 publishes a separate c constant for 2026, 2027 and 2028, and for many activities it is higher each year. Others keep the same value across all three years.


General information as at November 2026, not legal advice. The worked example is our arithmetic; check your own position on Qiwa.

Official sources

Verify current requirements directly with the authorities. Nitaqat rules and constants change, and the official text is always ahead of any guide, including this one.